1991 Dehler 37 CWS

1991 Dehler 37 CWS   Specifications

Dehler 37 CWS

Name............................................................ Constantia

Year...................................................................... 1991

Builder.................................. Dehler Yachtbau, Germany

Designer.................................................... Van de Stadt

LOA............................................................ 36.09ft/11m

LWL.............................................................. 29.53ft/9m

Beam......................................................... 11.48ft/3.5m

Draft............................................................ 5.91ft/1.8m

Displacement........................................ 11,684lb/5300kg

Ballast..................................................... 4630lb/2100kg

Sail Area .......................................... 667.36sqft/62.00m

Hull  ..............................................................Fiberglass

Deck............................................................. Fiberglass

Steering............................................................... Wheel

Keel............................................................ Fin cast iron

Rudder................................................................ Spade

Fuel............................................................... 26gal/98L

Water........................................................... 53gal/201L

Hot Water............................................................... 6gal

Holding Tank........................................................... Yes

Heat....................................... Espar D1 diesel forced air

CONSTRUCTION

•   Hull: Hand laminated includes Kevlar for strength.
•   Solid laminate below the waterline, balsa coring above
•   Decks: Balsa sandwich construction
•   Traverse and longitudinal beams molded into the hull provides stiffness plus galvanized steel members are used to distribute keel and rig loads
•   Keel: bolt on type cast iron fin keel
•   Rudder: Spade type is elliptical in profile with a S/S stock into which the steel framework is welded

INTERIOR

•   3 cabin 1 head layout, with an extremely spacious salon
•   All joiner work is to a high standard with all corners having a radius for safe living
•   Vessel is well ventilated with opening ports and bright
•   Salon: centerline dinette table with two foldout leaves
•   Long bench seating port and starboard
•   Storage lockers and shelves outboard of seating
•   Galley: Linear counter to port with storage below and lockers outboard
•   Stove:  Eno 2 burner with oven propane
•   Fridge: under counter (currently not working)
•   Large S/S sink with pressurized hot/cold water
•   Chart table: large designated area, perfect for passage planning, fold away seat, desk with storage, instrumentation, AC/DC distribution panels
•   Fwd Cabin: V berth double, storage lockers, shelves, overhead opening hatch, lights
•   Aft Cabins: two identical double bed cabins, opening side ports, storage lockers, reading lights
•   Head: enclosed compartment to starboard midships, finished in FRP, easy to clean, round sink in vanity with storage below, pressurized hot/cold faucet, shower, manual pump toilet, with fold down seat for showering, Pidgeon hole storage compartments

MECHANICAL

•   Yanmar 3GM 30F, 28hp
•   Hours: 5970
•   Fresh water heat exchanger
•   S/S shaft
•   Propeller: Max-Prop 2 blade
•    PSS shaft seal

ELECTRICAL + PLUMBING

•   30amp shore power
•   120VAC/12VDC with distribution panels
•   Start Battery: GRP 24 lead acid
•   House Batteries: 2 x 4D lead acid
•   Bilge pumps: Electric Rule 1100gph, manual bilge pump

INSTRUMENTS

•   GPS: Garmin
•   Radar: Simrad mounted on a post on the stern
•   Depth sounder: Raymarine
•   VHF: Icom

SAILS & RIGGING

•   Mainsail: North sails, fully battened, stack pack
•   Genoa: 135% on Profurl roller furler
•   Self tacking jib: 90%
•   Spinnaker: 1.5oz
•   Spinnaker pole
•   Fractional rigged sloop, swept back spreaders
•   Mast: Aluminum double spreader, deck stepped
•   Boom Aluminum
•   Standing rigging: S/S 1 x 19 wire
•   Adjustable backstay
•   Mainsheet traveller in the cockpit
•   Unique to the Dehler CWS is the central electric winch mounted on a beam in the cockpit where all running lines feed through clutches on either side of the winch and can be easily accessed by the skipper or the crew
•   All running rigging runs from the mast under the decks to the cockpit leaving an uncluttered deck
•   Self tacking jib track forward of the mast, plus adjustable genoa tracks

DECK GEAR

•   Electric windlass: Simpson Lawrence
•   Anchor: Bruce 33lb, 210’ 5/16’ chain
•   Spare anchor: Bruce 16lb, 100’ 5/16 chain, 100’ nylon
•   Winches: one central electric Lewmar #44
•   Primary winches: Lewmar 40ST manual
•   S/S tube pushpit and pulpit with stanchions and double lifelines
•   Swim platform with a fold down ladder
•   Helm seat hinges open for easy access to the swim platform
•   Lockers aft quarter of the cockpit
•   Single wheel with binnacle and instruments

 ADDITIONAL EQUIPMENT

•   Tender: Bombard 7’ inflatable
•   Outboard: Mercury 3.5hp
•   BBQ
•   Dodger
•   Mainsail cover

 MAINTENANCE

•   Last haul-out and anti-fouling: 2022
•   Last zinc(s) change: 2022
•   Last engine oil change: 2022